Photocell LDR Sensor Light Sensor Includend Photosensitive Sensor Module For Arduino Analog Output

General Description

Photosensitive sensor module is the most sensitive for the environmental light intensity and it is generally used for detecting the ambient brightness and intensity of the environment. Without light intensity it will not reach the threshold resulting for low level output but, when the external environment light intensity exceeds the set threshold it will result for a high level output. The output is directly connected with the microcontroller, for the microcontroller to detect the light level, thereby to detect environmental intensity change. Small digital output can directly drive the relay module, which can be composed of a photoelectric switch. Small analog output, through the AD conversion, can obtain more accurate numerical value of environmental light intensity.

Photosensitive resistance module Is most sensitive to ambient light. Module is commonly used to detect amient light. Module can be directly connected with Microcontrollers or to trigger relay module. Module sets output to LOW logic (on DO pin) if the light intensity is higher than set point. Module only supports digital output and does not has Analog output.

Specification

Output can be directly connected to the microcontroller I/O port.
The sensitivity of the signal detection can be adjusted.
Reserve a line voltage to compare circuit.

Name:Photosensitive Resistance Sensor Module
Power:+3.0V -5.5V
Signal:Analog signal
Connector: XH2.54 × 3
Pin:S-Signal,V-Power,G-Ground
Instructions for use: Connect the power supply and read the analog quantity of the signal pin. The analog
quantity is different according to the light intensity.

Feature

Uses photosensitive resistance sensor
Uses LM393 wide voltage comparator
Clean signal, good waveform, strong driving ability for more than 15 mA
With adjustable potentiometer to adjust light sensitivity
Has single mounting hole

How to test:

1. Connect your Arduino microcontroller to the computer.

2. Connect the VCC pin of your module to the to the 5V pin of your Arduino.

3. Connect the GND pin of your module to the GND pin of your Arduino.

4. Connect the Output pin of your module to the A0 pin of your Arduino.

5. Enter this program to your Arduino Integrated Development Environment (IDE):

void setup()

{

Serial.begin(9600);

}

void loop()

{

if (analogRead(A0) > 20) Serial.println("Light");

else Serial.println("Dark");

delay(100);

}

6. Click the Upload Button

7. Lastly, click the Serial Monitor button

Testing Result:

When the module is exposed to light:

When the module is exposed to dark:

Corresponding PCB Code

Uchi was established in 2006 in Dongguan, China. 

After years of development, Uchi has become a large scale hi-tech enterprise that specialized in development and production of complete series of MOV,PTC, NTC series, PPTC series, Fuse(ALL TYPE),Resistor、integrated circuit 、 Capacitor, surge protector and protective devices of lightning protection products. It ranks front in the industry and has heartquarter in Hong Kong. With its excellent technology and quality products, Uchi has won wide recognition of overseas customers. Saini Impex PVT.LTD is our authorized sole distributor in india .

China's leading enterprise of circuit protection components​

Our strength ：

A large number of product series in our factory have passed the certification of various international standards




Factory Tour​ ：

Advanced equipment, lean production

Uchi boasts with a production base that covers an area of nearly 15000 square meters.
 

We successively imported high-tech fully automated production equipments and high precision testing instruments and have put into production to realize the automation, large scale and standardization.

Uchi has a galaxy of hi-tech talent teams headed up by national class experts to engage in the work of product development, product quality control, sales andservice technical support, etc., and has successively obtained tens of certificates of appearance patents, utility patents and inventions.
 

To guarantee the quality, we successfully passed the certification of ISO9001:2008 quality management system, scientific and efficient managing mode to carry out lean production and form scientific and efficient quality control system. The products are certified with UL, CUL, TUV, VDE, CSA and SGS, RACH 73 environmentally friendly testing certifications.

Exquisite quality at customers' favor

Uchi is an export membership of Alibaba with free import and export rights. It is appraised as Guangdong Famous Star Enterprise and Dongguan Private Enterprise. Our products have doubled and redoubled to provide more kinds and high quality and reliable products and service. Our products mainly consist of: 

Metal Oxide Varistor
DIP Varistor & SMD Varistor
Thermally Protected Varistor

DC-Link Capacitor for New energy vehicles supporting the HEVEV

Automotive Fuse Links for EV Plugin HEV FCEV
PTC Thermistor

NTC Thermistor

PPTC Resettable Fuse

Thermal Fuse

Auto Blade Fuse

Glass Fuses

Metal Film Resistor

Carbon Film Resistor

Cement Resistor

NTC Temperature Sensor

CDS Photoconductive Cell

Our products are widely used in New energy vehicles, home appliance, medical equipment, office equipment, communication equipment, phone battery, electronic calendar, electronic thermometer and temperature controller to cover military telecommunications, IT, automobile and consumer electronic fields.
Cooperation with good faiths to win in the market.
Excellent quality sincere service is the key to the success of Uchi. 

In the future Uchi will still stick to the tenets of "Quality first, customer foremost." "First class quality, first class service and customersatisfaction" to manufacture the high quality, technically advanced and reasonable prices products. We hope to trigger with global partners the revolution in resistor products. We cordially welcome friends from home and abroad to visit us for guidance and cooperation.