562 Series Circuit Board Mount Radial Leaded Fuse Blocks Cross PC
Mount Subminiature Fuse Holder For TE5 TR5 Micro Fuses
Description
Fuse holders are devices for containing, protecting and mounting
fuses. Fuse holders come in two basic types, open or fully
enclosed. Open fuse holder types are fuse clips, fuse blocks,
socket and plug-on cap varieties. The fully enclosed variety may
use a fuse carrier that is inserted into a holder or have other
means to fully enclose the fuse.
Product Characteristics
| 562 Series |
| Compatible Fuses | TR5/TE5 |
| Block: | Black Thermoplastic, UL94 V-0 PET |
| Terminals: | Copper alloy; solderable tinned |
| Rated Voltage: | 250V |
| Max. Current/Power: | 6.3A/1.6W |
| Mounting | PC Board, 5.08mm pin spacing |
| Unit weight | 0.12g |
| Stocks | Aavailable |
Dimensional drawing (units in mm)
Mounting
Mounting choices for fuse holders include fuse block, fuse clip,
panel mount, PC mount, snap mount, and in-line mount. Important
environmental parameters to consider when specifying fuse holders
include operating temperature.
Features
Common features for fuse holders include waterproof, vibration
resistant, and blow fuse indicator.
Ordering Information
| Ordering Number | Circuit Board Mounting | Packaging |
| 56200001009 | Thru-Hole | 1000 (Bulk pack) |
Agency Approvals
| Series | 562 |
| Agency UL File Number | E14721 |
Standards
Approvals and ratings for fuse holders include UL, CSA, BSI, VED,
IEC (UMF), SEMKO, and Dentori.
The UL Listing guarantees that a fuse has been manufactured in full
compliance with the UL 248-14 standard. UL recognition, c-UL
Listing, c-UL Recognition, c-UL-us Listing and c-UL-us Recognition
does not imply full compliance with UL-248-14.
CSA Canadian approval that guarantees the a fuse or fuse holder has
been manufactured in full compliance with the CSA C22.2 No. 248.14
or CSA C22.2 No. 39 standard, respectively.
The BSI British approval guarantees that a fuse has been
manufactured in full compliance with the appropriate section of IEC
60127 (BS 4265) standard.
The VDE German approval guarantees that a fuse or fuse holder has
been manufactured in full compliance with the appropriate section
of the IEC 60127 standard.
IEC approval applies to Universal Modular Fuses (UMF) that have
been found to be compliant with IEC 60127-4.
SEMKO Swedish approval guarantees that a fuse or fuse holder has
been manufactured in full compliance with the appropriate section
of the IEC 60127 standard.
Dentori Japanese approval guarantees that a fuse has been
manufactured in full compliance with the Japanese MITI stand.
Links to the above standards are listed below.
IEC 60127-1 - Definitions for miniature fuses and general requirements for
miniature fuse-links
IEC 60127-4 - Universal modular fuse-links (UMF)
CSA C22.2 - General requirements - Canadian electrical code, part II
UL 248 - Low voltage fuses
Size and Spefication Example
Standard fuse sizes range from ¼” diameter, 5/8” length (1AG) to ¼”
diameter 1” length (8AG), to 5mm x 20 mm, pico fuses and automotive
blade. "Automobile Glass" fuses use the term "AG" in the fuse size
designation. Bakelite fiber, ceramic or other similar material
fuses use the term "AB" instead of "AG" in the size designation,
but retain the dimensions of the "AG" types. Automotive blade fuse
sizes differ from glass tube sizes due to the shape of the fuse.
Important performance specifications to consider when searching for
fuse holders include normal operating current, rated operating
voltage, and power dissipation capacity. The maximum power
dissipation (self-heating) of the fuse used with the fuse holder.
Also called the Rated Power Acceptance. The minimum conducting path
or conductor cross-sectional area of the conductor connected to the
fuse holder should also be considered.
